Products

1- Install and Configure the Apple Access point
2- Install the dialer program
3- Use the dialer program

1- Install and Configure the Apple Access point

1- Connect the access point to the telephone and power it on.
2- Download airportadmin.zip utility (2.3 MB)
3- Unzip and run the airportadmin.zip utility
4- Use this airport extreme admin utility for configuring the access point.
Note that the Main Number is the telephone number that you normally use to connect to the internet. The username and the password are username and password that you use to connect to the internet.
DNS servers: 193.227.177.130 and 193.126.16.38
5- Automatic dial is not recommended and so it is better to clear the Automatically dial box and then download the dialer program as explained below.



5- Putting a mac address is a way that will help in securing that you only will have access to the internet. To get the physical address of your access card, you can go to command prompt (Press Start  Run and then type cmd). C\> command prompt will appear. After that type C:\> ipconfig/all

6- Add the physical address as shown below




7- Put a password for accessing the configuration file.
This configuration password can be set in the Summary page.

2- Install the dialer program
The dialer program is the program that is used to connecting and disconnecting to the internet.

a- Install the java application in case it is not already installed on your computer.
Download the j2re-1_4_2_06-windows-i586-p.zip (13.4 Mb) from our website.
(You can get the recent versions from the http://www.sun.com )
b- Run this program and choose all defaults.
c- Download the AirportModem.zip (16 Kb) utility and then install it.

3- Use the dialer program
The dialer program shown below provides an easy way to connect and to disconnect from the internet.